There are many forms of rubber gaskets, such as some commonly used rubber flat gaskets, rubber O-rings, plastic flat gaskets, PTFE-coated gaskets, asbestos rubber gaskets, metal flat gaskets, metal special-shaped gaskets, Metal sheathed washers, wave washers, spiral wound washers, etc. The rubber fl... read more
1. Characteristics of nitrile rubber gasket: petroleum base oil, hydrocarbon resistance and water resistance increase with the increase of acrylonitrile content, but the low temperature and air permeability will decrease accordingly. It is not suitable for phosphate ester, hydraulic oil and containi... read more
1. High and low temperature resistance, can be used for a long time at 200℃, and still elastic at -60℃; 2. Electrical insulation function, the dielectric function of silicone rubber is excellent, especially the dielectric function at high temperature greatly exceeds that of general organic rubber, a... read more
1. When the rubber gasket is molded, the cohesive force of the elastomer cannot be eliminated due to the large pressure limit. When the molding is released, the extremely unstable shortening often occurs (the shortening rate of the rubber depends on the type of rubber. There are differences), it mus... read more
What is the reason for the tearing of the fluorine rubber gasket? The tearing of fluororubber gaskets is generally caused by two processing processes: tearing during trimming and tearing during mold removal. The former is mainly caused by too thick scrap edges; the latter has many reasons, including... read more