Rubber gasket technical standards have rules. Storing, […]
Rubber gasket technical standards have rules. Storing, Packing, and Shipping If the storage conditions are in compliance with the rules, anti-aging ethylene propylene rubber and fluoro rubber will not be bad for a long time. The shelf life of rubber parts depends on the environment in which the various products are used, and the plan depends on the plan. The rubber gasket is a hot-melt thermosetting elastomer, and the plastic is attributed to hot-melt coldness. Because the main body of rubber is different, the temperature range of molding and curing also has a proper gap, and it can be affected by climate change and indoor temperature and humidity. Therefore, the production conditions of rubber products need to be adjusted at any time. If not, the quality of the finished product may be different. The rubber gasket is a raw material made of a rubber material and mixed with a rubber mixer. The rubber rubber is used as a raw material according to the characteristics of the desired rubber product, and the required hardness of the product is determined. Commodity manufacturing molding is cured by rubber flat sheet
There are different rules for the rubber parts that are not molded by the machine. One of the more effective ways to reduce the temperature of the friction zone is to add a lubricating filler to the rubber to reduce the friction factor of the compound. For example, molybdenum disulfide and graphite are added to the rubber production formula. In addition, the use of polytetrafluoroethylene (PTFE), polytetrafluoroethylene has excellent resistance to medium and weathering, a wide range of use, good self-lubricating properties, a small friction factor, coated on the rubber surface The surface friction factor of the rubber product is greatly reduced, and the wear resistance and the medium resistance performance are improved.