news

Types of sealing strips are affordable

Update:18-03-2021
Summary:

Classification and characteristics of window sealing st […]

Classification and characteristics of window sealing strips
In order to install the windows tightly to avoid air leakage and water leakage, window sealing strips are usually installed, which can be dustproof, waterproof, soundproof and sealed. However, many people still don't know it very well, especially when installing this one. The following editor will introduce you to the installation method and precautions of the window sealing strip.
Door and window sealing strips are mainly used for decorative doors and windows of buildings such as plastic steel doors and windows, aluminum alloy doors and windows, wooden doors and windows. Plastic-steel door and window sealing strips on the market are generally extruded from PVC, modified PVC, EPDM, elastomer sealing strips (including TPV, TPE, TPR, SEBS), silicone and other materials.
According to different uses, window sealing strips can be divided into three categories: door leaf and door cover sealing strips, wool strips, and glass sealing strips (rubber strips). The door leaf cover sealing strip is mainly used for the sealing between the door panel and the door frame, and the wool strip is mainly used for the sealing between the door frame and the door leaf, and the glass sealing strip is mainly used for the sealing between the glass and the door leaf and frame.
1. Glass cushion strip and mouth-stop tape:
(Window frames, window sashes) After welding the corners, the rubber strips should be pushed in the correct direction in the correct direction. Use special rollers to push the rubber strips into the profile slot with a little force, and at the same time, press the rubber strip head down until it is embedded in the profile slot. . Since the rubber strip is an elastic body, it may shrink after rolling. The correct method is: when the rubber strip is installed at the two ends of the joint, retract the two ends of the rubber strip to the middle a little bit, and leave 2- The shrinkage allowance of 3 cm is then cut and inserted into the notch.
2. Glass layering:
Manually insert the tip of the rubber strip into the profile groove according to the correct surface, and then press the exposed surface of the rubber strip firmly to press the rubber strip into the gap between the glass and the profile. The rubber strips at both ends are retracted a bit toward the middle, leaving a length of 1-2 cm, then cut off, and press into the notch.
What is the effect of installing the sealing strip
Nowadays, there are too many places to install weather strips. For example, we use weather strips on the windows of our homes, our cars, and engineering equipment. So let's talk about the reasons why sealing strips are used? Rubber sealing strips appeared in our daily lives a long time ago, but there were too few places where sealing strips were used in that era, and it is not the same as now. Sometimes we will use rubber sealing strips as a waterproof seal in places we can't think of. This also shows that the development and progress of our country is moving forward day by day. So what are the benefits of installing a sealing strip and bring out those effects?
One: The sealing strip will make the windows we live in to be sealed and waterproof, play a quiet role in the home, and bring a peaceful life to our family.
Two: The sealing strip will play the role of shock absorption, pressure and oil resistance for our engineering equipment and environmental protection equipment, and will also play a role of sealing and dustproofing.
Three: The sealing strip brings a quiet and comfortable environment in the car to our car, avoiding the entry of sand and rain in the car. In short, there are so many places where the sealing strips are used. We will not forget our original intention to produce perfect and qualified rubber sealing strip products for each manufacturer to use with peace of mind.

Related Products:Weatherproof Auto Door Rubber Seal

Contact Us